Display Console; Install Backup Battery And Power Up - Bresser ClimateConnect Tuya Bedienungsanleitung

3.4 DISPLAY CONSOLE

1. Time & Date
2. Indoor / CH temperature & humidity
3. Outdoor temperature & humidity
4. WIND, BARO, RAIN, UV and Light
intensity

3.4.1 INSTALL BACKUP BATTERY AND POWER UP

Backup battery provides power to the console to retain clock time and date, max/min records and
calibration value.
Remove the console
battery door with coin
NOTE:
- The backup battery can back up: Time & Date, Max/Min records and calibration value.
- The built-in memory can back up: connection settings.
POWER UP THE CONSOLE
1. Plug in the power adapter to power up the console.
2. Once the console is power up, all the segments of the LCD will be shown.
3. The console will automatically enter AP mode and sensor synchronization mode
automatically.
4.
Blinking:
Sensor synchronization
in progress
5. The wireless sensor will automatically pair up with console (about 1 minute). Upon successful
synchronization, display will change from "- -.-°C, - -%" to actual reading.
Step 1
Insert a new CR2032
1
2
3
4
Step 2
button cell battery
12
Step 3
Replace the battery door.
Blinking:
Console currently in
Access Point (AP) mode
Blinking:
Trying to connect to router
Stable:
Connected to router
Stable:
Connected to router and
synchronized to local time