Terminal Overview Of Enclosure Size H6; Connecting To Mains And Compressor Terminals - Danfoss VLT Compressor Drive CDS 803 Bedienungsanleitung

VLT® Compressor Drive CDS 803
Operating Guide

3.2.3.3 Terminal Overview of Enclosure Size H6

95
1
2 3
Illustration 3: Enclosure Size H6
1 Mains
2 Ground

3.2.3.4 Connecting to Mains and Compressor Terminals

• Tighten all terminals in accordance with the information provided in
• Keep the compressor cable as short as possible to reduce the noise level and leakage currents.
• Use a shielded/armored compressor cable to comply with the EMC emission specifications and connect this cable to both the
decoupling plate and the compressor. Also see
1. Connect the ground cable to the ground terminal, then connect the mains supply to terminals L1, L2, and L3.
18 | Danfoss A/S © 2021.06
99
4
3
4
1.3.2.5 EMC-compliant Electrical
Compressor
Relays
1.3.2.1.1 Fastener Torque Ratings.
Installation.
AQ32174876762701-000301 / 130R0627
Installation