Power Cable Connection - Pioneer ANH-P9R Installationsanleitung

Connecting the Units

Power cable connection

Note
Depending on the kind of vehicle, the function of 3* and 5*
may be different. In this case, be sure to connect 2* to 5*
and 4* to 3*.
3*
5*
C a p ( 1 * )
When not using this terminal,
do not remove the cap.
8
En
1*
2*
4*
Yellow (3*)
Yellow (2*)
Back-up
To terminal always supplied
(or accessory)
with power regardless of
ignition switch position.
Red (5*)
Red (4*)
Accessory
To electric terminal controlled
(or back-up)
by ignition switch (12 V DC)
ON/OFF.
Orange/white
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
Speaker leads
White
White/black
Gray
Gray/black
Green
Green/black
Violet
Violet/black
GPS aerial jack
RCA outputs
(Refer to page 10.)
Connect leads of the
same color to each other.
Fuse holder
: Front left +
: Front left ≠
: Front right +
: Front right ≠
: Rear left + or Subwoofer +
: Rear left ≠ or Subwoofer ≠
: Rear right + or Subwoofer +
: Rear right ≠ or Subwoofer ≠
IP-BUS input (Blue)
This Product
Antenna jack
Fuse resistor
Fuse resistor