Function Test Of The Speed Signal, Reverse Signal, Internal Sensors; Function Test Of The Gps Antenna - Pioneer ANH-P9R Installationsanleitung

Setting the Navigation
Function test of the speed signal,
reverse signal, internal sensors
1 In service garage mode, select
with the rotary stick and press to confirm.
2 Move the vehicle several metres forwards
or backwards for the speed signal function
test.
The number after
WHEEL
at a low speed).
The number after
WHEEL
idling or accelerating when the vehicle is
parked.
The values after : and
X
3 Engage the reverse gear for the reverse
signal function test.
The number after
REVERSE
to ( to ).
1 1 0
4 In order to quit the sensor test, press the
button.
NAVI/OK
The unit switches back to service garage mode.
SENSORS
: should increase (even
: should not increase if
: should not change.
Y
: should jump from

Function test of the GPS antenna

1 In service garage mode, select
with the rotary stick and press to confirm.
If GPS reception is functioning properly, the
number of satellites received (e.g.
date and time (e.g.
of locationing currently possible
are displayed.
• At least
FIX 2D
cessful calibration. A certain amount of time
may be required to reach this value (do not
move the vehicle during this period).
2 In order to quit the GPS test, press the
button.
NAVI/OK
The unit switches back to service garage mode.
0
GPS-INFO
SAT 5
) and the type
13.03.99 14:56:08
(e.g.
FIX:
is required for quick and suc-
), the
)
3D
23
En