Handlebar Tilting Lever With Safety Catch; Freewheeling Lever; Differential Locking Lever - Rapid MONDO 1550 Bedienungsanleitung

4.7

Handlebar tilting lever with safety catch

The operating handlebar can be tilted by ± 20° or ± 30° or turned by 180° using the
handlebar tilting lever. The safety catch prevents accidental turning of the handlebar by
more than 20° or 30° when actuating the handlebar tilting lever.
By pulling the lever to the stop of the guard plate the handlebar can be tilted by ± 20° or ±
30°.
Lifting the guard plate and pulling the lever to the limit stop enables the handlebar to be
turned by 180° (see Appendix Dimensions).
The machine can suddenly trap the user or third persons, cause them to fall over or run
them over.
• The handlebar tilting lever must not be pulled when traveling on an incline.
• Turning the handlebar by 180° must only be carried out in stationary condition.
• You must not attempt to bypass the function of the guard plate.
4.8

Freewheeling lever

The hydraulic system can be bypassed using the freewheeling lever.
The freewheeling function is activated by pulling out the lever. To deactivate the
freewheeling function, push the lever in as far as it will go.
When the machine is in freewheeling condition:
• It can be manually moved.
• It looses the braking effect of the hydraulic system.
The machine can suddenly trap the user or third persons, cause them to fall over or run
them over.
• Never activate "Freewheeling" on a slope.
• The machine must not be towed.
4.9

Differential locking lever

The differential lock enables the synchronism of both wheels (increased traction).
To move the lever forwards release it from the lock by slight pulling and tilting.
• The differential is locked when the lever is in front position.
• The differential is not locked when the lever is in rear position.
The differential lock can be activated and deactivated while travelling.
The machine can suddenly trap the user or third persons, cause them to fall over or run
them over.
• Do not use the differential lock when cornering or driving with a trailer.
Machine no. from CI 1001
Warning
Warning
Note
Warning
EN
117