INVENTOR WF-60A1 Installationshandbuch Und Benutzerhandbuch Seite 14

4. INSTALLATION METHOD
9. Connect the smart port to the wire controller （if needed）
① Remove the top cover from the gap between the top
cover and bottom by a tool with flat head. (See Fig.4-11)
② Use the connective cable to connect the wire controller
and CN3 of the smart port. (See Fig.4-12)(refer to the Wire
controller manual for details)
NOTE:
Connection for wired control function by KJR-120C/TF-E
KJR-120G2/TFBG-E
10
14
Fig 4-11
CN3
Fig 4-12