Processor; User Interface; Inputs & Outputs; Power Supply Specifications (Absorption / Installation) - dB Technologies VIO W10 Bedienungsanleitung

English

PROCESSOR

Internal controller:
A/D D/A converter:
Limiter:

USER INTERFACE

Presets:
Controls:
INPUTS & OUTPUTS
Audio inputs:
Audio outputs:
USB (firmware update):

POWER SUPPLY SPECIFICATIONS (ABSORPTION / INSTALLATION)

Absorption at 1/8th of power in
average use conditions (*):
Absorption at 1/3rd of power in
maximum use conditions (**):
Absorption with speaker on in
no-signal condition (idle):
Inrush current:
Total current and power allowed in
a daisy-chained system:
* NOTE FOR INSTALLER: Values refer to 1/8th of power, under average operating conditions (music programme with occasional or no
clipping). For any type of configuration we recommend to consider them as minimum sizing values.
** NOTE FOR INSTALLER: Values refer to 1/3rd of power, under heavy operating conditions (music programme with frequent clipping and
limiter activation). In case of professional installations and tours we recommend sizing according to these values.
VIO W10
28-bit/56-bit DSP
24 bit/48 kHz
Peak, RMS, Thermal
Standard, Narrow, Wide, Far
8-Pos BCD rotary switch, MIC LINE SWITCH, Input attenuation
COMBO XLR, 6.3 mm JACK
1x XLR link OUT
Type-B Mini-USB port
0.25 A (220-240V~) - 0.42 A (100-120V~)
0.8 A (220-240V~) - 1.4 A (100-120V~)
18 A - 1950 W max / 15 A - 3450 W max
19 W
24.6 A
Code 420120291 REV.1.0
31