Installing/Removing The Unit - JVC KW-NSX600 Bedienungsanleitung

Installing/Removing the unit

Installing the unit
Mounting sleeve
When installing the unit using the mounting bracket removed from the car
Select the type of
screws appropriate
for the mounting
bracket.
Supplied
screws
If necessary, restore the protruding tabs.
Removing the unit
1 Detach the trim plate (2).
Only for KW-NSX700: Open the monitor panel
beforehand. (☞ page 10)
2 Insert the two extraction keys (4), then pull
them as illustrated so that the unit can be
removed.
Trim plate (2)
Mounting bracket removed from the car
For more stable attachment
Screw (commercially available)
Accessory 5
Screws removed from the car when uninstalling
the car audio originally installed
• When you use screws other than those supplied
(Accessories 6 and 7), use 8 mm-long screws. If
longer screws are used, they could damage the unit.
• Tighten the screws firmly to prevent the unit from
falling off.
KW-NSX700:
KW-NSX600:
75
Stay (commercially available)
Supplied
screws
Extraction keys 4
Extraction keys 4