Connection - JVC KW-NSX600 Bedienungsanleitung

Connection

Aerial cord
☞ pages 73 – 74
Rear ground terminal
Aerial terminal
Wiring harness (1)
Blue with white stripe (Remote output wire)
Brown (Mute control wire)
Blue with yellow stripe
(Steering remote control wire)
Orange with white stripe (Dimmer control wire)
Yellow (Battery wire)
Red (Ignition wire)
Red (A7)
Yellow (A4)
Connector A
Connector B
Pin Colour and functions
A4 Yellow
A5 Blue/White
A6 Orange/White
A7 Red
A8 Black
☞ page 73
Purple with white stripe
☞ page 74
☞ page 73
10 A fuse
If no connections are made, do not let the cable come out from the tab.
Battery
Power control
Dimmer
Ignition (ACC)
Ground connection
☞ page 73
Connect to vehicle's reverse lamp harness
when using the optional rear view camera.
Light green
Extension wire (3)
For best safety, be sure to connect
the parking sensor.
Connect to the vehicle's parking brake detection
switch harness.
To the remote lead of other equipment (200 mA max.)
Not used
To the OE remote adapter matching your car
To car light control switch
Connecting the ISO connectors
You may need to modify the wiring of the supplied wiring
harness as illustrated below.
Red
(Ignition wire)
Unit
Yellow
(Battery wire)
Default wiring
Pin Colour and functions
B1/B2 Purpleª / Purple/Black·
B3/B4 Grayª / Gray/Black·
B5/B6 Whiteª / White/Black·
B7/B8 Greenª / Green/Black·
72
Red (A7)
Vehicle
Yellow (A4)
Right speaker (rear)
Right speaker (front)
Left speaker (front)
Left speaker (rear)