Safety - Carrier 40VA003D7FAQEE Installations- Und Benutzerhandbuch

Safety

• If the connection kit is transferred to a new user, this manual should be transferred to the user along with the
conditioner.
• Before installation, be sure to read Safety Considerations in this manual for proper installation.
• The safety considerations stated below are divided into "
accidents caused by incorrect installation are listed in ' Warning'; these accidents are likely to lead to death or
serious injury. Aspects listed under "
important for ensuring safety, and these safety considerations should be strictly followed.
• After installation, perform a test run to ensure everything is in normal condition, and operate and maintain the
connection kit in accordance with the user manual. The user manual should be delivered to the user for proper
keeping.
• Please ask the special maintenance station for installation and repair. Water leakage, electric shocks or fire
accidents might be caused from improper installation if you conduct the installation by your own.
• The installation should be conducted properly according to this manual. Water leakage,electric shocks or fire
accidents might be caused from improper installation.
• Please make sure to install the connection kit on the place where can bear the weight of the connection kit. The
connection kit can't be installed on the grids such as the non-special metal burglar-proof net. The place with
insufficient support strength might cause the dropdown of the machine, which may lead to personal injuries.
• The installed unit should be able to withstand typhoons, earthquakes, etc. Installation that does not conform to the
requirements will lead to accidents due to the machine falling over.
• Specific cables should be used for reliable connections of the wirings. Please fix the terminal connections reliably to
avoid the outside force applied on the cables from being impressed on the cables. Improper connections and fixings
might lead to such accidents as heating or fire accidents.
• Correct shapes of wirings should be kept while the embossed shape is not allowed. The wirings should be reliably
connected to avoid the cover and the plate of the electrical cabinet clipping the wiring. Improper installation might
cause such accidents as heating or fire accidents.
• While placing or reinstalling the connection kit, except the specific refrigerant (R410A), don't let the air go into the
refrigeration cycle system. The air in the refrigeration cycle system might lead to the cracking or personal injuries due
to abnormal high pressure of the refrigeration cycle system.
• During installation, please use the accompanied spare parts or specific parts. If not, water leakage, electric shocks,
fire accidents or refrigerant leakage might be caused.
• During installation, if refrigerant leakage occurs, ventilation measures should be taken, for the
refrigerant gas might generate harmful gases upon contacting the flame.
Warning' and "
Attention" are also likely to cause severe accidents. In general, both are
Warning
2
Attention". Aspects related to severe