Operations On The Screen - JVC KW-AV71BT Bedienungsanleitung

Operations on the screen

Setting <Display Sensor>
Change the settings of how to display the buttons, the
sensitivity of the motion sensor, and how the screen is
changed when no operation is performed for a while.
1
On <HOME> screen:
2
3
<Sensor>
Selects the method to show the buttons and playback
information.
Motion Shows the buttons and playback
information when you move your hand
closer to the motion sensor.
• The motion sensor does not work when
the screen is turned off. (☞ page 8)
Touch Shows the buttons and playback
information when you touch the screen.
Off Deactivates the [Motion] or [Touch]
function.
• To hide the buttons and playback information again
when [Motion] or [Touch] is selected, touch the
screen repeatedly.
<Motion Sensitiv.>
Selects the sensor sensitivity ([High] or [Low]).
• Available when <Sensor> is set to [Motion].
<Time Out Mode>
Selects the items shown on the screen when no
operation is performed for approximately 10 seconds
and when the light of the /HOME on the monitor
panel is turned off.
• Available when <Sensor> is set to [Motion] or
[Touch] (☞ above).
Simple Shows source information and some
source control buttons (such as volume
control buttons).
Backgrnd The background is shown.
BlackOut The screen is turned off.
• To restore the screen:
– When <Sensor> is set to
[Motion], move your hand closer
to the motion sensor.
– When <Sensor> is set to [Touch],
touch the screen.
11