Using other external components
AV-INPUT
You can connect an external component to the LINE IN/VIDEO IN jacks.
~
Press [SOURCE], then press [AV-IN].
• You can also use SOURCE on the monitor panel. Press it repeatedly.
Ÿ
Turn on the connected component and start playing the source.
To display the operation buttons (☞ page 23) while watching the playback picture
Touch the screen (center portion).
• If no operations are done for about 5 seconds, the operation buttons disappear.
Sound mode (☞ page 57)
☞
(
Assigned title (☞ page 58)
page 11)
15:45
Touch the screen (center portion).
54