Activating/Deactivating Ta/Pty Standby Reception - JVC KW-AVX810 Bedienungsanleitung

Activating/deactivating TA/PTY
Standby Reception
TA Standby Reception
Press on the monitor panel to
activate.
The unit will temporarily switch to
Traffic Announcement (TA) if available,
from any source other than AM.
• The volume changes to the preset
TA volume level if the current level is
lower than the preset level (☞ page
63).
Not yet activated. Tune in to another
station providing the RDS signals.
Press to deactivate.
PTY Standby Reception
To activate, display <AV Menu>
screen, press [Mode], then press
[On] for <PTy Standby>. (☞ next
column)
The unit will temporarily switch to
your favorite PTY programme from any
source other than AM.
Not yet activated. Tune in to another
station providing the RDS signals.
To deactivate, press [Off] for <PTy
Standby> in step 3 on the next
column.
• When a DAB tuner is connected, TA Standby/PTY
Standby Reception also works for the DAB tuner and
searches for the services.
To activate PTY Standby Reception
1
Indicator
TP
2
Lights up
3
Flashes
Goes off
Indicator
PTY
PTY Standby Reception is now activated for PTY
code <News>: the initial setting.
Lights up
By pressing
or deactivate PTY Standby Reception.
Flashes
Goes off
17
Mode
Mono
SSM
PTy Standby
PTy Code
Back
Short Cut icon, you can activate
Continued on the next page
Exit
Start
News
Exit
OPERATIONS