Raclette - Silvercrest SRGS 1400 B2 Bedienungsanleitung

Raclette

1) Oil the stone griddle
inside.
2) Insert the plug into a mains power socket. The power indicator lamp
up red to show that the appliance is connected to the mains.
3) Turn the temperature control
up green to show that the appliance is heating up. As soon as the heat-up
indicator lamp
NOTE
► The heat-up indicator lamp
during this process. This is not an appliance malfunction! It merely indi-
cates that the appliance is maintaining the set temperature.
► Depending on the room temperature, heating up will start at different
positions on the temperature control
up at normal room temperature in the striped area of the temperature
control scale
you will hear a slight "click" and the appliance will start to heat up.
If you only want to use the raclette, allow the appliance to heat up for 10 min-
utes. If you want to use the stone griddle
around 30 minutes until the stone griddle
"Grill").
The pans
4) Fill the pans
overfilled otherwise the food could get too close to the heating elements and
could even touch them!
5) Place the pans
keep the pans in place.
6) Turn the temperature control
perature. Turn the temperature control
the temperature again.
7) Remove the pans
■ 8 │
GB
and the griddle
to MAX. The heat-up indicator lamp
goes off, the appliance has heated up.
. If you turn the temperature control
do not need to be pushed into the appliance while it is heating up.
with the desired ingredients. Ensure that the pans
into the device. The slight recess in the appliance helps to
towards MIN if you want to reduce the tem-
from the device as soon as the contents are cooked.
on the top and the pans
may come on and go out several times
. The appliance does not heat
at the same time to grill food, wait
has heated up (see Chapter
towards MAX if you want to increase
on the
lights
lights
towards MAX,
are not
SRGS 1400 B2