Switching The Handset On/Off; Enabling/Disabling The Keypad Lock - Auerswald COMfortel M-520 Betriebsanleitung

8 R key
- query call (flash. Press for a short time)
- insert a dialling pause (press for a long time)
9 Micro USB connection for exchanging data between the handset and PC
10 Star key (function varies depending on situation):
Function varies depending on situation: when a connection is present, switch between
pulse dialling and tone dialling (press for a short time), during text input, open the
special characters table
11 Headset port (2.5 mm jack)
12 Keypad (here: Key 1)
Use this to call up the voicemail function on the PBX (if configured: press for a long
time)
13 Accept key/Hands-free key
Function varies depending on situation: dial displayed number, accept call, switch
between receiver operation and hands-free operation, open the Redial List (press for a
short time), start dialling (press for a long time)
14 Profile key
Use this to switch between sound profiles
15 Control key/Menu key
Function varies depending on situation: Use this to navigate in menus and input fields

Switching the Handset On/Off

Switching on:
Switching off:

Enabling/Disabling the Keypad Lock

The keypad lock prevents the telephone from operating unintentionally. If the
handset is secured with a PIN, you need that PIN to unlock it. When delivered,
the PIN is set to "0000".
Switching on:
Switching off:
Note: If a call is signalled on the handset, the keypad lock is automatically
disabled. You can accept the call.
Caution: When the keypad lock is enabled, you cannot call emergency
phone numbers either.
COMfortel M-520 - Instructions V04 09/2021
On the switched-off handset, press
When the switched-off handset is in an idle state, press
for a long time.
Press for a long time.
Press for a long time. Use the
PIN (if it is not 0000)
Using the Telephone
for a long time.
to enter the handset
37