Getting The Woom Original Ready; Unpacking - Woom ORIGINAL 4 Bedienungsanleitung

6

Getting the woom ORIGINAL ready

Please note: The designations left and right in these instructions always refer to the left or
right side of the bike as seen from above and in the direction of travel.
6�1 Unpacking
1. Remove packaging, carefully cut through cable ties.
CAUTION

When cutting the cable ties, make sure that you do not damage the bike parts, es-
pecially the tyres.
2. Remove the plastic protective disc from the rear derailleur.
3. You should write down the woom ORIGINAL frame number. This number uniquely
identifies the bike and is important in the event of theft and insurance matters. The
number can be found at the bottom of the frame (see arrow). You can also write
down the frame number in your warranty card – see cover sheet.
38