Parkside PAS D5 Bedienungs- Und Sicherheitshinweise Seite 26

Keep cutting tools sharp and clean. Properly
f)
maintained cutting tools with sharp cutting edges are less likely
to bind and are easier to control .
Use the power tool, accessories and tool bits etc.
g)
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation .
Keep handles and grasping surfaces dry, clean and
h)
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the tool
in unexpected situations .
Battery tool use and care
Recharge only with the charger specified by the
a)
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with another
battery pack .
Use power tools only with specifically designated
b)
battery packs. Use of any other battery packs may create a
risk of injury and fire .
22 GB