Seite 1
AKKU-SCHRAUBER PAS 4 A1 AKKU-SCHRAUBER CORDLESS SCREWDRIVER Originalbetriebsanleitung Translation of the original instructions IAN 280464...
Seite 2
Klappen Sie vor dem Lesen die beiden Seiten mit den Abbildungen aus und machen Sie sich anschließend mit allen Funktionen des Gerätes vertraut. Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. DE / AT / CH Originalbetriebsanleitung Seite...
AKKU-SCHRAUBER PAS 4 A1 Lieferumfang 1 Akku-Schrauber PAS 4 A1 Einleitung 1 Ladegerät PAS 4 A1-1 Wir beglückwünschen Sie zum Kauf Ihres neuen 1 Tasche Gerätes. Sie haben sich damit für ein hochwertiges 26 Bits x 25 mm Produkt entschieden. Die Bedienungsanleitung ist 2 Bits x 50 mm Teil dieses Produkts.
Schlages. b) Vermeiden Sie Körperkontakt mit geerdeten Oberflächen wie von Rohren, Heizungen, Herden und Kühlschränken. Es besteht ein erhöhtes Risiko durch elektrischen Schlag, wenn Ihr Körper geerdet ist. DE │ AT │ CH │ PAS 4 A1 3 ■...
Elektrowerkzeug ausgeschaltet ist, bevor gefährlich und muss repariert werden. Sie es an die Stromversorgung und/oder den Akku anschließen, es aufnehmen oder tragen. Wenn Sie beim Tragen des Elektrowerk- │ DE │ AT │ CH ■ 4 PAS 4 A1...
Öl und Fett. Rutschige stellt, dass die Sicherheit des Elektrowerkzeugs Griffe und Griffflächen erlauben keine sichere erhalten bleibt. Bedienung und Kontrolle des Elektrowerkzeugs in unvorhergesehenen Situationen. DE │ AT │ CH │ PAS 4 A1 5 ■...
Schutzhaube. Defekte Schutzhauben schützen Sie nicht vor ungewolltem Kontakt mit dem Schneideblatt. ■ Überprüfen Sie vor jeder Benutzung, ob die Schutzhaube im einwandfreien Zustand ist und das Schneideblatt festgezogen ist. │ DE │ AT │ CH ■ 6 PAS 4 A1...
Aufsatz nach vorne abgezogen quelle. werden. ♦ Trennen Sie das Ladegerät von der Lade- ♦ Stecken Sie anschließend die Gummikappe buchse des Gerätes. wieder auf die Werkzeugaufnahme. DE │ AT │ CH │ PAS 4 A1 7 ■...
Schraub-Bits sind mit ihren Maßen und der Form gekennzeichnet. Falls Sie sich unsicher sind, probie- ren Sie immer zuerst aus, ob das Bit ohne Spiel im Schraubkopf sitzt. │ DE │ AT │ CH ■ 8 PAS 4 A1...
Gehäuse zu entfernen, muss der Akku leer sein und die Schrauben am Gehäuse abge- schraubt werden. Die Anschlüsse am Akku müssen einzeln nacheinander getrennt und isoliert werden. DE │ AT │ CH │ PAS 4 A1 9 ■...
Ein als defekt erfasstes Produkt können Sie dann unter Beifügung des Kaufbelegs (Kassenbon) und der Angabe, worin der Mangel besteht und wann er aufgetreten ist, für Sie portofrei an die Ihnen mitgeteilte Service-Anschrift übersenden. │ DE │ AT │ CH ■ 10 PAS 4 A1...
Importeur HINWEIS Bitte beachten Sie, dass die folgende Anschrift ► Bei Parkside und Florabest Werkzeugen keine Serviceanschrift ist. Kontaktieren Sie zunächst senden Sie bitte ausschließlich den defekten die benannte Servicestelle. Artikel ohne Zubehör (z. B. Akku, Aufbewah- rungskoffer, Montagewerkzeuge, etc) ein.
EN 60335-2-29:2004+A2 EN 62233:2008 EN 55014-1:2006+A1:2009+A2:2011 EN 55014-2:1997+A1:2001+A2:2008 EN 61000-3-2:2014 EN 61000-3-3:2013 Typ / Gerätebezeichnung: Akku-Schrauber PAS 4 A1 Herstellungsjahr: 08 - 2016 Seriennummer: IAN 280464 Bochum, 04.10.2016 Semi Uguzlu - Qualitätsmanager - Technische Änderungen im Sinne der Weiterentwicklung sind vorbehalten.
Seite 17
Importer ............23 Translation of the original Conformity Declaration ..... 24 PAS 4 A1 ...
CORDLESS SCREWDRIVER Package contents 1 cordless screwdriver PAS 4 A1 PAS 4 A1 1 charger PAS 4 A1-1 Introduction 1 carrying tool bag Congratulations on the purchase of your new appli- 26 bits x 25 mm ance. You have chosen a high-quality product. The 2 bits x 50 mm operating instructions are part of this product.
There is an increased risk of elec- tric shock if your body is earthed or grounded. c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. PAS 4 A1 ■ │...
Arrange for damaged balance at all times. This enables better control components to be repaired before using the of the power tool in unexpected situations. power tool. Many accidents are caused by poorly maintained power tools. ■ │ GB PAS 4 A1...
fluid. If contact occurs, flush the affected area with water. Seek addi- tional medical help if any of the fluid gets into your eyes. Escaping battery fluid may cause skin irritation or burns. PAS 4 A1 ■ │...
Defective blade guards will not protect you against unintentional contact with the cutting blade. ■ Before each use, check whether the blade guard is perfect condition and that the cutting blade is firmly fitted. ■ │ GB PAS 4 A1...
(see fig. D) power supply. Inserting: ♦ Disconnect the charger from the charging socket on the device. ♦ Insert the bit into the tool holder Removal: ♦ Pull the bit out of the tool holder PAS 4 A1 ■ │...
Screw bits are labelled according to their dimen- sions and their shape. If you are unsure, always try the particular screw bit out to see whether it sits in the screw head without any free play. ■ │ GB PAS 4 A1...
To remove the battery from the housing, the battery must be empty and the screws unscrewed from the housing. The connections on the battery must individually disconnected and isolated. PAS 4 A1 ■ │...
You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred. ■ │ GB PAS 4 A1...
NOTE ► For Parkside and Florabest tools, please send us only the defective item without the acces- sories (e.g. battery, storage case, assembly tools, etc.). You can download these instructions along with many other manuals, product videos and software on www.lidl-service.com.
EN 62233:2008 EN 55014-1:2006+A1:2009+A2:2011 EN 55014-2:1997+A1:2001+A2:2008 EN 61000-3-2:2014 EN 61000-3-3:2013 Type/appliance designation: cordless screwdriver PAS 4 A1 Year of manufacture: 08 - 2016 Serial number: IAN 280464 Bochum, 04/10/2016 Semi Uguzlu - Quality Manager - We reserve the right to technical changes in the context of further product development.
Seite 29
KOMPERNASS HANDELS GMBH BURGSTRASSE 21 44867 BOCHUM DEUTSCHLAND / GERMANY www.kompernass.com Stand der Informationen · Last Information Update: 10 / 2016 · Ident.-No.: PAS4A1-102016-1 IAN 280464...