Setting The Timer - Kaisai KCA3U-12 Bedienungsanleitung

1
1
3
3
2
2
Swing
Boost
Clean
FAN Mode
Press the MODE button to select FAN mode.
1.
2. Press FAN button to select the fan speed
in a range of AU-100%.
Press the ON/OFF button to start the unit.
3.
NOTE: You can't set temperature in FAN mode.
As a result, your remote control's LCD screen
will not display temperature.
1
1
4
4
2
2
3
3
B o o s t
DRY Mode (dehumidifying)
1. Press the MODE button to select AUTO.
2. Set your desired temperature using the TEMP
or TEMP
button.
3. Press the ON/OFF button to start the unit.
NOTE: FAN SPEED cannot be changed in DRY
mode.
1
1
3
3
2
2
Boost Clean
HEAT Mode
1. Press the MODE button to select HEAT
mode.
2. Set your desired temperature using the
TEMP or TEMP button.
3. Press FAN button to select the fan speed
in a range of AU-100%.
Press the ON/OFF button to start the unit.
4.
NOTE: As outdoor temperature drops, the
performance of your unit's HEAT function may
be affected. In such instances, we recommend
using this air conditioner in conjunction with
other heating appliances.
54

Setting the TIMER

TIMER ON/OFF - Set the amount of time after which the unit will automatically turn on/off.
TIMER ON setting
Press TIMER button to initiate
Press Temp. up or down button for
the ON time sequence.
for multiple times to set the desired
time to turn on the unit.
TIMER x5
TIMER OFF setting
Press TIMER button to initiate
Press Temp. up or down button for
the OFF time sequence.
for multiple times to set the desired
time to turn off the unit.
TIMER
x10
NOTE:
1. When setting the TIMER ON or TIMER OFF, the time will increase by 30 minutes increments with each
press, up to 10 hours. After 10 hours and up to 24, it will increase in 1 hour increments. (For example,
press 5 times to get 2.5h, and press 10 times to get 5h,) The timer will revert to 0.0 after 24.
2. Cancel either function by setting its timer to 0.0h.
TIMER ON & OFF setting(example)
Keep in mind that the time periods you set for both functions refer to hours after the current time.
xn
TIMER
Unit turns
Timer starts
ON
Current 3:30PM 4PM
2:00PM 3:00PM
time 1PM
2.5 hours later
5 hours later
Point remote to unit and wait 1sec,
the TIMER ON will be activated.
1
sec
Point remote to unit and wait 1sec,
the TIMER OFF will be activated.
1
sec
xn xn
TIMER
Unit turns
OFF
Example: If current timer is 1:00PM,
to set the timer as above steps, the
unit will turn on 2.5h later (3:30PM)
and turn off at 6:00PM.
5PM 6PM
55