Ce Label; Set-Up; Checking The Scope Of Delivery; Installation - Vaillant recoVAIR VAR 60/1 D Installations- Und Wartungsanleitung

4 Set-up

Information on the
identification plate
V
MAX
Serial number

3.3 CE label

The CE label shows that the products
comply with the basic requirements of the
applicable directives as stated on the iden-
tification plate.
The declaration of conformity can be
viewed at the manufacturer's site.
4 Set-up

4.1 Checking the scope of delivery

▶
Check that the scope of delivery is com-
plete.
Quant- Contents
ity
1 Front panel
1 Wind protection
1 Wall-mounting frame
1 Fan unit
1 Regenerator with two filters
1 Operating instructions
1 Installation instructions
106
Meaning
Max. air volume flow
The 7th to 16th digits
of the serial number
form the article num-
ber
Installation and maintenance instructions recoVAIR 0020236694_00

5 Installation

5.1 Determining the installation
location
1. When determining the installation loc-
ation, take into consideration the pro-
duct's sound power level and sound
reduction index.
Technical data – General (→ Page 111)
2. Take into consideration the diameter of
the pipe and the minimum clearances
to ceilings, windows and corners.
5.2 Installing the pipe from the
pre-installation set
1. Insert the pipe from the pre-installation
set into the designated position on the
external wall.
– In doing so, observe the set-up in-
structions that are enclosed with the
product.
2. Ensure that the power supply cable
and the control cable are not damaged
when you drill through the wall.

5.3 Installing the outer hood

▶
Install the outer hood and its wall-
mounting frame.
– In doing so, observe the set-up in-
structions that are enclosed with the
product.
– Use suitable rawl plugs and flat-head
screws.