Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

With a single and short pressing of the but-
ton 4 , the hours can be adjusted.
Press the button 5 to confirm it. Repeat the
previous operation for setting the minutes.

DAILY USE

The appliance is provided with a weight
sensor that permits to measure the
quantity of laundry loaded into the
drum and advises you on the detergent
quantity to use. Before switching the ap-
pliance on, make sure that the drum is
empty. If you do not, the washing will
subsequently not be registered proper-
ly by the weight sensor. See chapter
«Weight sensor».
Open the door
Open the door by carefully pulling the door
handle outwards.
Select the required programme by
means of selector dial (1)
The machine is switched on now.
You can choose the right programme for
any type of laundry following the descrip-
tions on the washing programme tables
(see «Washing Programmes»).
Turn the programme selector dial to the re-
quired programme. The programme selec-
tor determines the type of washing cycle
(e.g. water level, drum movement, number
of rinses) and the washing temperature ac-
cording to the type of laundry.
The pilot light of the button 7 starts blinking
and the display shows the programme
name and the duration of the selected pro-
gramme.
The selector dial can be turned either clock-
wise or anticlockwise.
Position
to Switching OFF of the machine.
At the end of the programme the selec-
tor dial must be turned to position
to switch the machine off.
Caution! If you turn the programme
selector dial to another programme
when the appliance is working, the
display says to turn programme
selector in the last used position.
To change a running programme please re-
fer to «Altering an option or a running pro-
gramme».
Weight sensor
All manuals and user guides at all-guides.com
Important! If the appliance has already
been switched on once, refer to the
beginning of «Personalization» chapter.
After some seconds you switched the appli-
ance on the following indicators appear on
the display if the door is open:
• the maximum load capacity of the selec-
• the actual loading from 0.0 KG to the max-
• the animated bar that also fills itself with
• the detergent quantity recommended for
If too much laundry has been loaded into
the machine, the display will advise you
about overloading. Remove the exceeding
amount of laundry in such cases.
Press any button or close the door to let
the display show again the information
about the washing programme.
The indicating weight screen won't appear
any more when the door is closed and after
the button 7 has been pressed to start the
washing programme.
,
Load the laundry
ted programme, (i.e. 8 KG for Cottons;
see «Washing Programmes» for the maxi-
mum load of each programme),
imum load provided for the selected wash-
ing programme. Loads of less than 0.5
KG are not displayed,
steps corresponding to 0.5 KG ,
current load expressed as a percentage.
If settings are not undertaken for sever-
al seconds during the programme set-
ting process, the loading information ap-
pears on the display when the door is
open.
The weight and the detergent quantity
displayed for each programme are indi-
cative and permit to reduce the deter-
gent consumption.
electrolux 39

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Wa sl6 e 102

Inhaltsverzeichnis