Klarstein Gusto Classico Bedienungsanleitung Seite 23

Note: After 25 minutes of inactivity, the unit switches to standby mode. When the unit
goes into standby mode, set the power switch to the off position.
Brewing coffee
Note: Only use potable, fresh and cold water to make coffee.
1. Fill the appropriate coffee sieve with coffee.
2. Attach the sieve holder
3. Switch on the machine by setting the power switch to ON. The red indicator light
starts to blink and the unit starts to heat up.
4. As soon as the heating phase is complete, the red light is constantly lit.
5. Press the coffee switch downwards and the machine starts to brew coffee. To stop
dispensing coffee, move the switch to the off position.
Frothing milk
When the coffee is brewed, you can start frothing the milk.
1. Press the steam switch downwards, the blue light indicator starts to flash.
2. As soon as the machine has heated up, the blue indicator light stops flashing.
3. Fill a cup or mug with milk. We recommend using whole milk at room temperature
for better results.
Note: Do not use warm milk with the steam function. Use a milk cup or container with
a diameter of no less than 70 ± 5 mm. Remember that milk doubles its volume. So
make sure that the height of the milk cup/container is sufficient.
EN
23