Vaisala Indigo500-Serie Kurzanleitung Seite 29

1. In the User creation page, select Continue.
2. Type the activation code, and select Activate. Then select Next.
The activation code is printed on a label inside the transmitter enclosure. Use a 4-mm
Allen key to open the transmitter cover. A label with the activation code is also provided in
the accessory bag.
If you use the web interface with Firefox, make sure your device's time
settings are correct. Incorrect device time settings will prevent the use of the
activation code.
3. Create a username and password for the Administrator user, and select Next.
4. Create a username and password for the Guest user (optional), and select Finish.
The web interface restarts. After the restart, you can log in using the credentials you just
created.
27