Vaisala Indigo500-Serie Kurzanleitung Seite 17

Analog outputs are not available in transmitters that are powered with Power over Ethernet
(PoE).
Use the touchscreen or web interface to change the output mode (for example, 0 ... 5 V or
4 ... 20 mA) and scaling of the analog outputs.
+
CH1
RS-485
PROBE
1
+
CH2 24 VOUT
+
ANALOG
CH3
INPUT
+
CH4
M20×1.5
Table 8 Analog output terminals
Terminal Function
CH1 + Analog output channel 1 +
CH1 - Analog output channel 1 -
CH2 + Analog output channel 2 +
CH2 - Analog output channel 2 -
CH3 + Analog output channel 3 +
CH3 - Analog output channel 3 -
CH4 + Analog output channel 4 +
CH4 - Analog output channel 4 -
Ethernet connector and lead-through
You must use a shielded cable to meet the rated EMC performance of the device.
Before connecting wires or cables, make sure that the transmitter is powered off.
VS
2
For the M20×1.5 cable gland ordered
together with the transmitter from Vaisala,
the cable diameter is 5.0 ... 8.0 mm
(0.20 ... 0.31 in). Tightening torque for the
cable gland is 8 Nm.
For the M20×1.5 cable gland with split
bushing, the cable diameter is 7 mm
(0.28 in).
Notes
Max. wire size: 2.5 mm
2
(14 AWG)
15