Canon ImageRunner 3045Ne Anwenderhandbuch Seite 50

● If login authentication by the SDL or SSO
login service is set:
❑
The Start Up screen is displayed until the machine is
ready to scan.
1
❑
After the Start Up screen disappears, the MEAP
Start Up screen is displayed regardless of the Set as
Initial Function settings.
IMPORTANT
• If you turn OFF the main power, wait at least 10 seconds
before turning the main power back ON.
• Do not turn the main power OFF if you want to be able to
send or receive fax or I-fax documents. Also, do not turn
the main power OFF, if the optional Super G3 FAX Board
is installed, and you want to be able to send or receive
fax documents. Sending or receiving I-fax or fax
documents cannot be done when the power is
turned OFF.
• If SSO or SDL is set as the login service, the machine
will take longer to become ready to scan.
4
If you are using a login service, log in using the procedure for the login
service you are using.
1-24
Main Power and Control Panel Power
Downloaded from ManualsPrinter.com Manuals