Periodic Inspection Of The Breaker; Checking The Breaker - Canon ImageRunner 3045Ne Anwenderhandbuch

Periodic Inspection of the Breaker

This machine has a breaker that detects excess current or leakage current. Be sure to test the
breaker once or twice a month using the following procedure.
IMPORTANT
• Make sure that the main power is turned OFF before inspecting the breaker.
• If a malfunction occurs after an inspection, contact your local authorized Canon dealer.

Checking the Breaker

1
Push the test button with the tip of a ball-point
pen, or similar object.
IMPORTANT
Briefly push the test button.
NOTE
• The breaker is located on the left side of the machine.
• For more information on the location of the breaker, see
"External View and Internal View," on p. 1-15.
2
Confirm that the breaker lever is switched to the OFF ("
IMPORTANT
• Do not use the test button to turn the power ON and OFF.
• If the breaker lever does not switch to the OFF ("
• If the breaker lever does not switch to the OFF ("
procedure two or three times, contact your local authorized Canon dealer.
Downloaded from ManualsPrinter.com Manuals
" side) position.
" side) position, repeat step 1.
" side) position, despite carrying out the above
Periodic Inspection of the Breaker
2
1
xxiii