Appendix A; A.1 I/O Connections And Wiring - Siemens SITRANS FUH1010 Betriebsanleitung (Kompakt

Appendix A

A.1 I/O Connections and Wiring
Terminal Block Wiring
(Refer to manual drawing 1010XS2-7 sheet 3 of 3. When Barriers are used, isolation is
limited to the Barrier's working voltage. Refer to table on manual drawing 1010-341 sheet 3).
These connection diagrams apply to the part numbers listed below.
Table A- 1
FUH1010
①
Table A- 2
Pin#
1
2
3
4
5
6
7
8
9
10
SITRANS FUH1010 Quick Start
Operating Instructions (Compact), 12/2008, CQO:QSG010 Revision A
All manuals and user guides at all-guides.com
Part Numbers and Connection Diagrams
1010XS2-7 (Sheet 3 of 3) Drawing
Menu Lockout Switch S1
FUH1010 Input/Output Wiring (TB1)
Signal Function
Io1 - Isolated Loop Return
Io1 + Isolated Loop Supply
ANIN - Analog Input Return
ANIN + 4-20mA Input
Status - Status Bit Return
Status + Status Output
PGEN - Pulse Generator Return
PGEN + Pulse Generator Output
7ME3601ab
where:
a= 0
b= D or F
Not used on Single channel units.
Spannable 4-20mA output proportional to any
available data variable assigned under menu
control.
4-20mA input non-isolated (7ME3531-xF only)
Isolated Status Alarm Emiter
Isolated Status Alarm Collector
Isolated PGEN Emitter
Isolated PGEN Collector
A
Description
39