Rear Panel - Panasonic AK-HRP150G Bedienungsanleitung

Major operating controls and their functions
Rear panel
 Tally signal input connector [TALLY IN]
 Camera I/F connector [CAMERA I/F]
Connected to the camera (AK-HC1500G) with the attached multi cable.
 Synch signal input connector [G/L IN]
Inputs the sync signal to the camera.
 DC12 V input connector [DC12V IN] (XLR4-pin)
Connects the AC adapter. We recommend that the AW-PS505A (sold separately) is
used.
Pin No. Signal
1 R TALLY
2 N.C.
3 N.C.
4 R TALLY COM
Pin No. Signal
1 —
2 —
3 —
4 G/L output
5 DC12 V output
6 GND
7 TX_P output
8 —
TXD: Data from camera to remote controller.
RXD: Data from remote controller to camera.
Pin No. Signal
1 GND
2 N.C.
3 N.C.
4 DC12V
- 11 (E) -
Pin No. Signal
9 —
10 —
11 G/L GND
12 DC12 V GND
13 TX_N output
14 RX_P input
15 RX_N input