Sage the Barista Touch BES880 Kurzanleitung Seite 20

PROBLEM
Coffee not hot enough.
No crema.
Water leaking.
20
POSSIBLE CAUSES
Cups not pre-heated.
Portafilter not pre‑heated.
Milk not hot enough
(if making a cappuccino
or latté etc).
Water temperature needs
to be adjusted.
Coffee tamped too lightly.
Coffee is ground too coarsely.
Coffee beans or pre‑ground
coffee are not fresh.
The filter basket may be blocked.
Single Wall filter baskets are being
used with pre‑ground coffee.
Auto purge feature. Immediately
after the espresso, hot water and
steam functions, the machine
will purge water into the drip tray.
This ensures the thermocoil
is at the optimal temperature.
Water tank is not fully inserted
and locked into position.
The silicone seal surrounding
the shower screen needs to be
replaced to ensure the portafiler
is properly secured into the
group head.
EASY SOLUTION
Rinse cups under hot water outlet
and place on cup warming tray.
Rinse portafilter under hot water
outlet. Dry thoroughly.
Make sure sensor is in contact.
Adjust milk temperature setting
on screen.
Increase the brew temperature
in 'Settings' menu.
Tamp betweens or 15–20kg
of pressure.
Use slightly finer grind. Refer to
'Setting the Grind Size', page 10
and 'Under Extraction', page 13.
If grinding fresh whole coffee beans,
use freshly roasted coffee beans with
a 'Roasted On' date and consume
between 5–20 days after that date.
If using pre‑ground coffee, use within
a week of grinding.
Use the pin on the end of the provided
cleaning tool to unblock the hole(s).
If the hole(s) remain blocked, dissolve
a cleaning tablet in hot water and
soak filter basket and portafilter
in solution for approx. 20 minutes.
Rinse thoroughly.
Ensure you use Dual Wall filter
baskets with pre‑ground coffee.
Ensure the drip tray is firmly pushed
in place and emptied whenever the
Empty Me! indicator is displayed.
Push water tank down completely
to lock into place.
Refer to 'Replacing the Silicone
Seal',page 17.