Using The Beertender System; Inserting A Beertender Keg - Krups BeerTender VB700E00 Bedienungsanleitung

Make sure the main switch on the right is set on "0"
before connecting the BeerTender to the mains.
Insert the plug into a socket with the correct voltage
and turn on the appliance by moving the main switch to
"I".
6

Using the BeerTender system

Inserting a BeerTender Keg

Note: the BeerTender may only be used with
BeerTender Kegs "Compatible BeerTender" containing
beer sold by the Heineken group.
The appliance can only be used if it contains a
BeerTender Keg and only if the main switch is set on "I".
The control display on top of the lid, when illuminated,
tells you that the appliance is switched on.
The appliance will immediately start cooling the inner
chamber as soon as the main switch is moved to "I".
You can open the appliance by pushing the front handle.
When the handle is released, you can lift the lid up.
Note: do not force the lid beyond the set opening
position as this could damage it.
When the lid is completely open, insert a BeerTender
Keg as shown in the figure.
Open the tap cover by turning it anti-clockwise.
Note: this cover can be removed for cleaning.
12