Maintenance; Cleaning; Replacing The Battery Of The Pac93 - Chauvin Arnoux MN93 Bedienungsanleitung

The manufacturer cannot be held liable for any accident that occurs fol-
lowing a repair not performed by its customer service department or by an
approved repairer.

4.1. CLEANING

Disconnect the current sensor completely.
Use a soft cloth, dampened with soapy water. Rinse with a damp cloth and dry rapidly
with a dry cloth or forced air. Do not use alcohol, solvents, or hydrocarbons.
Keep the air gaps of the clamps perfectly clean.

4.2. REPLACING THE BATTERy OF THE PAC93

„ Disconnect the PAC93 completely and turn the rotary switch to OFF.
„ Turn the PAC93 over.
„ Use a screwdriver to unscrew the screws and remove the battery compartment
cover.
„ Withdraw the battery from its compartment without pulling on the wires.
„ Disconnect the old battery without pulling on the wires and connect the new one
in its place, observing the polarity.
Spent batteries must not be treated as ordinary household waste. Take them
to the appropriate recycling collection point.

4. MAINTENANCE

23