Product Description - Concept CP3010 Bedienungsanleitung

EN

PRODUCT DESCRIPTION

1 Steam release lever
2 Steam release safety lock
3 Handle
4 Display
5 Vacuuming On/Off button
6 Steam On/Off button
7 Water tank
8 Dust container
9 Nozzle release button
2
1
3
4
5
6
7
8
9
10
11
56
10 Nozzle
11 Cleaning cloth holder
12 High intensity steam button
13 Low intensity steam button
14 Selected steam intensity indication
15 Heat on indication
16 Cleaning cloth
17 Carpet glider
12
16
17
OPERATING INSTRUCTIONS
Assembly
1. Insert the handle into the body of the appliance; the connecting latch of the
handle must fit into the opening in the body (Fig. 1). Push until you hear a click.
2. Lock - step on the suction nozzle with your foot and tilt the handle slightly
backwards. This releases the lock and the appliance is ready for use. When you
return the handle to the vertical position, the lock is activated.
3. Power cord release - turn the hook 45° to release and remove the cable.
4. Easy storage of the power cord - turn the hook to a vertical position, wrap the
cord around the upper hook and the lower hook located under the handle.
5. Handle for carrying - the handle is located on the front of the appliance body
for easy lifting, carrying and use on stairs.
6. Microfibre steam mop cover holder
A. Place the suction head on the microfibre steam mop cover holder to attach
it.
13
B. To release the microfibre steam mop cover holder, step on the release pedal
with your foot and lift the entire appliance out of the holder (Fig. 2).
Very important notice!
• To ensure maximum lifetime of the appliance, we strongly recommend using
only distilled or demineralized water. If you live in an area with hard water,
14
limescale will clog the appliance and reduce its efficiency!
• After each use, remove the water tank and empty it!
15
Vacuum cleaner control
NOTE: Do not use the steam mop cover holder when vacuuming.
7. Press the Vacuuming On/Off button.
8. To empty the dirt container, grasp the handle of the container, press the
release button and remove the container (Fig. 3).
9. After sliding the filter out, empty the container.
10. Place the dirt container back into the appliance.
NOTE: Do not use the vacuum cleaner if the dirt container is not installed correctly.
CP3010 CP3010
EN
Fig. 1
Fig. 2
57