Product Description - Concept NO8010 Bedienungsanleitung

EN

PRODUCT DESCRIPTION

1 Rotary hanger
2 Telescopic rod
3 Steam head
4 Handle
5 Steam hose
6 Detachable water tank
3
4
8
7
46
7 On/Off switch
8 Hose base
9 Rod base
10 Crease attachment
11 Brush attachment
12 Drain plug
1
2
11
5
12
9
6
10
PRODUCT ASSEMBLY INSTRUCTIONS
1. Attach the hanger to the telescopic rod.
2. Insert the telescopic rod into the base.
3. Open the rod locks and pull out the rod completely. Close the locks in this position.
4. Insert the steam hose and secure it with screwing.
5. Place the steam head in the holder.
Insert
1
Lock
2
Important safety information:
• Always place the steam head in the holder. Never let it lay loose. This could result in accidental personal injury or
property damage.
• The telescopic rod must be fully extended to ensure maximum steam throughput in the steam hose.
• Never attempt to wind or otherwise bend the steam hose using excessive force.
• Never carry the appliance by pulling on this hose.
ACCESSORY AND ITS USE
The brush attachment opens the fabric fibres to ensure better steam penetration and results. It helps to remove animal
hair and lints.
The crease attachment is used to make creases in trousers or remove stubborn wrinkles. Insert the fabric between the
two parts of the accessory. Move the crease attachment from top to bottom. The trousers then maintain the desired
shape for a longer period of time.
NO8010 NO8010
2
2
Insert
1
1
Open
Screw
EN
47