Klarstein Arabica Comfort Bedienungsanleitung Seite 24

EN
24
Settings before brewing
• Pull out the height-adjustable tray when using a small cup to brew espresso.
• Leave the height-adjustable tray in its compartment when using a larger cup to brew
cappuccino.
• Leave the height-adjustable tray in its compartment when using a larger cup to brew
latte.
Note When brewing cappuccino or latte, ensure that the foam tube lever is adjusted
so that the end of the milk foam tube is inside the cup.
Switching the machine on
• Make sure that the machine is connected to the mains.
The two espresso indicator lights on the control panel blink during heating and until the
water reaches the perfect temperature. Once these lights are constantly lit, the machine
is ready for use.
Preparing espresso
• Press the [single Espresso] button once to brew a single espresso.
• Press the [double Espresso] button once to brew a double espresso.
• Press and hold one of the [Espresso] buttons for 3 seconds to adjust the preparation
according to your preferences.
• When you are finished, press the correspond [Espresso] button again to stop the
preparation.
The machine starts to prepare the espresso according to your selection. When the
espresso is completely brewed the two [Espresso] lights will keep flashing to indicate
that the cycle is complete.
Note: To brew less coffee than the preset amount, press the [Espresso] button during
the brewing process to stop the brewing process when the desired amount of coffee
is reached.