Playing Back Audio From A Bluetooth Device On The Unit; Disconnecting Bluetooth Connection - Yamaha NX-N500 Bedienungsanleitung

Playing back audio from a Bluetooth
device on the unit
1
Press (Bluetooth) on the remote control.
The input source switches to Bluetooth.
2
Turn on the Bluetooth function on the Bluetooth
device.
Specifying connection setting
Connection
established
3
Play back a song on the Bluetooth device.
• Perform Bluetooth connection with the device and unit within 10 m (33 ft)
of each other.
• If necessary, select this unit again from the Bluetooth device list on the
paired device. Depending on your device, it may be necessary to select
this unit as the audio output.
• Adjust Bluetooth device volume as needed.
• If a Bluetooth device has been connected before, the unit will connect to
the last connected device when
Disconnect this connection to pair a new device (p.25).
Blue (flashing)
Blue (lit)
(Bluetooh) is pressed with step 1.

Disconnecting Bluetooth connection

Bluetooth connection is disconnected in the following cases.
When the connection is disconnected, the status indicator on
the front panel of this unit flashes in blue.
• The connection is disconnected from the Bluetooth device,
or the Bluetooth device is turned off.
• (Bluetooth) on the remote control is held down for at
least 5 seconds.
• The unit is turned off.
25
En