Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10
EN
Press and hold the button for approx. 4 seconds. The battery-powered display is now activated and system settings can be adjusted
independently of the network. In network operation, the button is disabled.
DE
Drücken und halten Sie die Taste für eine Dauer von ca. 4 Sekunden. Das batteriegespeiste Display wird nun aktiviert und Systemeinstellungen
können netzunabhängig vorgenommen werden. Im Netzbetrieb ist die Taste außer Funktion.
FR
Maintenez la touche enfoncée pendant environ 4 secondes. L'afficheur secouru par batterie est alors activé, et vous pouvez procéder au
réglage des paramètres système, même si le projecteur n'est pas relié au secteur. Lorsque le projecteur est relié au secteur, la touche n'est pas
fonctionnelle.
ES
Mantenga pulsado el botón durante unos 4 segundos. Se activará la pantalla alimentada por batería y podrá realizar los ajustes del sistema sin
conexión a la red eléctrica. Este botón no está operativo si el equipo está conectado a la red eléctrica.
PL
Nacisnąć i przytrzymać przycisk przez ok. 4 sekundy. Zasilany akumulatorowo wyświetlacz zostanie teraz włączony, co umożliwi wprowadze-
nie ustawień systemowych niezależnie od dostępności zasilania sieciowego. Przycisk nie działa, gdy urządzenie zasilane jest z sieci.
IT
Premere il tasto e tenerlo premuto per circa 4 secondi. Ora il display a batteria si attiva ed è possibile effettuare le impostazioni di sistema
senza collegamento alla rete elettrica. Con collegamento alla rete, il tasto non è operativo.
EN
Note: The microphone for music control mode is located under the base of the spot.
DE
Hinweis: Das Mikrofon für die Betriebsart Musiksteuerung befindet sich auf der Unterseite des Scheinwerfers.
FR
Précision : Le microphone intégré pour le pilotage par la musique se trouve en dessous de l'amplificateur.
ES
Nota: el micrófono para el control por sonido se encuentra en la parte inferior del foco.
PL
Wskazówka: mikrofon wykorzystywany w trybie pracy sterowanie muzyką znajduje się na spodzie reflektora.
IT
Nota: il microfono per la modalità di funzionamento "Controllo tramite musica" si trova sul lato inferiore del faro.
OPERATION / BEDIENUNG / UTILISATION / OPERACIÓN / OBSŁUGA / UTILIZZO
EN
NOTE:
When the spotlight is properly connected to the mains, "Software Update Please Wait..." (only for internal purposes) and the CAMEO logo appear
successively on the display during the startup process and resetting of the motors. After this operation, the spotlight is ready for use and changes to
the mode that was previously selected.
A. MAIN DISPLAY (DMX mode)
In the upper line of the display, the DMX mode (DMX 05Ch, 13Ch, 22Ch) is prominently displayed in the middle of the DMX start address. As soon as
the DMX signal is interrupted, the background colour of the display changes to red, and "No DMX" is displayed; if the DMX signal is present again, the
display switches back to the main display. The display can be rotated by 180° by pressing the + button.
DMX 22Ch
001
Press Mode To Navigate
B. MAIN DISPLAY (Standalone mode)
In the upper line of the display, the "Operating Mode" is prominently displayed in the middle of the Standalone mode (e.g.: Static). The display can be
rotated by 180° by pressing the + button.
Operating Mode
Static
Press Mode To Navigate
C. SETTING THE DMX START ADDRESS (DMX Address)
Pressing the MODE button will take you to the selection menu for system settings. Using the arrow buttons, select the menu item "DMX Address"
(dark background) and confirm by pressing ENTER. The 3 digits which show the DMX start address, change their colour to red, and you can use the
+ and - buttons to select the desired DMX start address. Confirm the process with ENTER and press the MODE button to return to the main display.
System Settings
DMX Address
001
Mode
DMX 22CH
Settings
System Info
D. SETTING THE OPERATING MODE (Mode)
Pressing the MODE button will take you to the selection menu for system settings. Using the arrow buttons, select the menu item "Mode" (dark back-
ground) and confirm by pressing ENTER. The digits which show the operating mode (for example DMX 22CH), change their colour to red, and you can
use the + and - buttons to select the desired operating mode. Confirm the process with ENTER and press the MODE button to return to the main display.
Operating modes: DMX 05CH, 13CH, 22CH, Slave, Auto, Sound, Static.
16
Werbung
Inhaltsverzeichnis
