Introduction To Use; Overall Dimensions - Femi GOLD Gebrauchsanleitungen Und Wartung

INDEX
1 INTRODUCTION TO USE ...................................... 11
2 INSTALLATION ....................................................... 13
3 ADJUSTING ........................................................... 13
4 USE ........................................................................ 14
5 ACCESSORIES ...................................................... 15
6 MAINTENANCE ..................................................... 15
7 TROUBLESHOOTING ............................................ 16
1

INTRODUCTION TO USE

Before using your mitre-saw, please read this instruction
manual very carefully in order to become familiar with the
machine and its recommended use.
Do not lose this manual as it is an essential part of the
machine itself. We recommend you always refer to it in order
to operate the machine in the best and safest way possible.
Keep the manual with the machine and handy at all times to
be consulted whenever necessary.
Use the machine exclusively for the uses specified below,
follow manual instructions carefully and never try to force or to
tamper with it, or to use it inappropriately.
1.1 SAFETY INFORMATION AND NOTES
Do not underestimate the symbols "HAZARD" and "CAUTION"
in this manual.
Symbols and notes precede all hazardous operations both to
give safety messages and to draw the users' attention to
danger and also to outline the appropriate behaviour to adopt
to avoid such events.
The three symbols used and relative wording are the
following:
HAZARD:
high risk behaviour which could be severely harmful.
CAUTION: behaviour which could be moderately
harmful or damage objects.
NOTE: the notes preceded by this symbol are of a
technical nature and simplify use.
1.2

OVERALL DIMENSIONS

Lenght 640 mm - Width 560 mm - Height 660 mm
Upper work surface ..................................... 475 x 325 mm *
* Dimension work surface ............................ 460 x 305 mm
Upper work surface max protrusion of blade .......... 55 mm.
Bulk .............................................................................. kg 28
1.3 SAFETY AND RULES
The machine was designed and built according to the
Community Directives in force: 98/37 CE, 2006/95/CE - 2004/
108/CE.
The enclosed CE Declaration of conformity, togheter with the
CE mark on product, essentially comprise and are an integral
part of the machine: both guarantee product conformity with
the aforesaid safety Directives.
1.4 RECOMMENDED AND NOT RACCOMENDED USE
The most advanced technologies have been used to design
and manufacture the mitre-saw. It is suitable to cut wood,
aluminium and plastics used by professionals, craftsmen
and expert hobbyists alike.
SUITABLE USE
To cut:
- HARD AND SOFT, DOMESTIC AND EXOTIC WOOD BOTH
LONGITUDINALLY AND TRANSVERSALLY
and with appropriate adjustments (specific blade and
clamps):
- PLASTICS
- ALUMINIUM AND ALUMINIUM ALLOYS
UNSUITABLE USE
Do not cut:
- FERROUS MATERIALS, STEEL AND CAST IRON OR ANY
OTHER MATERIAL NOT MENTIONED ABOVE AND IN
PARTICULAR FOODSTUFFS.
- CIRCULAR SAW WITHOUT PROTECTION.
11