Insert the XL- into the wheel rail. Align the wheel stopper so that
it is always positioned between the wheels of the bike, never be-
fore or behind them. Push the wheel stopper onto the wheel rail.
Remount the cover and tighten the screw.
5.1 ATTACH THE BICYCLES
• Push the unlocking lever (1) upwards. Now you can pull the
lashing strap from the turnbuckle.
• Now place the bicycle onto the bike rack and attach it to the
frame holder in line with the instructions issued for the bike
rack.
• Push the wheel stopper toward the tyres of the bicycle and
then tighten the wing nuts of the wheel stopper.
CAUTION:
The wheel stopper must always be positioned
between the wheels of the bike, never before
or behind them.
• Wrap the lashing strap around the wheel rim of the bicycle
and insert it into the turnbuckle (2).
• Position the wheel rim protector so that the lashing strap
cannot rub against and damage the wheel rim during trans-
portation.
• Tighten the lashing strap by levering the turnbuckle (3)
several times.
6. MAINTENANCE AND CARE
Clean the wheel stopper using a slightly moist, soft cloth and
a mild cleaning agent. Do not use aggressive cleaning agents,
solvents or petrol. Store the wheel stopper in a dry place.
7. NOTES REGARDING ENVIRONMENTAL PROTECTION
Please dispose of the wheel stopper via the recycling bin or the
public/municipal collection points.
The materials are recyclable. Play a part in protecting our envi-
ronment by recycling or reusing waste equipment.
8. CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
5