Inhaltsverzeichnis - Carrier XCT7 Installations- Und Benutzerhandbuch

User Manual
Your air conditioner maybe subject to any change
owing to the improvement of Carrier products.
XCT series multiple air conditioning systems adopt
the consistent running mode, by which, all indoor
units can only be heating or refrigerating operation
at the same time.
To protect the compressor, the air conditioning
unit should be kept on/turned on for over 12 hours
before using it.
All indoor units of the same refrigerating system
should use the unified power switch to ensure that
all indoor units are in the state of being powered
on at the same time during the operation of air
conditioner.
CONTENT
Parts and Functions
Safety
Maintenance
Fault Checkup
Installation Procedures
Electrical Wiring
Test Run & Fault Code
Move and scrap the air conditioning
Product Features:
1. Low static pressure air conditioners for the
indoor units of this series;
2. The built in installation helps save space;
3. Automatic display of fault detection;
4. Central control function (optional from our
company);
5. The air conditioner is provided with the
function of compensation for power
supply. If the power supply fails ,the
air conditioner is designed to resume
functioning at the same settings once
power supply is restored.
6.1. This indoor unit has a wire control
function. The remote control function,
however, will need to be set in the factory,
on request.
Operating Range of Air Conditioner
indoor
cooling dry
outdoor
indoor
heating
outdoor
max. DB: 32 C WB: 23
o
min. DB: 18 C WB: 14
o
max. DB: 43 C WB: 26
o
min. DB: -5
max. DB: 27
min. DB: 15
max. DB: 21 C WB: 15
o
min. DB: -15
1
2
5
6
7
12
20
21
C
o
C
o
C
o
C
o