Carrier XCT7 Installations- Und Benutzerhandbuch Seite 26

Electrical Wiring
(3) Description of SW03
SW03 1 Manner
of set
address
Set the
SW03 2 Commun
~ ication
SW03 8 and
Central
control
address
with dip
switch
(*Note 2)
*Note1*
1. The address must be set by dip switch if central control is used.
2. SW03-2=OFF, central control address = physical address +0 SW03-2=ON, central control address= physical address +64
3. The address must be set by dip switch if double 19848199886 are used together.
(4) Description of SW07
SW07 1 Tdiff correction valve in
SW07 2 AUTO
mode
SW07 3 26 lock
SW07 4 In heating, inlet air
SW07 5 temp. Tai correction
valve Tcomp2
SW07 6 room card. OEM HRV
linkage
SW07 7 In heating, inlet air
SW07 8 temp. Tai correction
valve Tcomp2
0 Set the address with wired controller or automatism(default)
1 Set the address with dip switch
[2] [3] [4] [5] [6]
0 0 0 0
0 0 0 0
0 0 0 0
-- -- -- -- --
0 1 1 1
1 0 0 0
1 0 0 0
1 0 0 0
-- -- -- -- --
1 1 1 1
[1] [2]
0 0
0 1
1 0
1 1
1 normally, without 26 degree lock function(defaulted)
0 26 degree lock function is available (In cooling mode, though set temp. is below
26 degree, count as 26 degree. In heating mode, though set temp. exceeds 20
[4] [5]
0 0
0 1
1 0
1 1
1 room card function is unavailable, HRV linkage function is unavailable(default)
0 room card function and HRV linkage function is available
[7] [8]
0 0
0 1
1 0
1 1
[7] [8] Commu
nication
address
0 0 0 0#
(default)
0 0 1 1#
0 1 0 2#
-- -- --
1 1 1 63#
0 0 0 0#
0 0 1 1#
0 1 0 2#
-- -- --
1 1 1 63#
Tdiff correction valve in AUTO mode
Tdiff:0
Tdiff:1
Tdiff:2
Tdiff:3(default)
degree, count as 20 degree)
Inlet air temp. Tai correction valve Tcomp2(eeprom)
Tai correction valve=12
Tai correction valve=4
Tai correction valve=8
Tai correction valve=0 (default)
Function
[FAN] [COOL] [DRY] [HEAT]
[FAN] [COOL] [DRY]
[FAN] [COOL] [DRY] [HEAT] [ELECTRIC-HEAT]
[AUTO] [FAN] [COOL] [DRY] [HEAT](default)
18
Central
control
address
0#
(default)
1#
2#
--
63#
64#
65#
66#
--
127#