Carrier XCT7 Installations- Und Bedienungsanleitung Seite 27

Function Operation
Batch change the air-conditioner mode setting: After setting one air- conditioner, press and pop window will
pop out as shown in Picture 6.
If you choose "All", then all indoor units will operate as ordered.
If you choose "indoor unit selection", then the page will turn to an interface displaying all indoor units. Press the indoor
unit icons to choose the indoor units (the chosen ones will turn dark in color), and will operate as ordered.
As shown in picture 6,"1st Floor " "2nd Floor" "3rd Floor" are three part areas. Choose one area and all indoor units in this
area will operate as ordered.
Change the name of the air-conditioner: As shown in picture 7, on pressing air- conditioner number 26-1, it will display
the text box "please input device name." Click on the blank text box to display the keyboard. After typing in the name,
press "ENTER" to close the keyboard. Setting name/Rename is executed. The longest name can be 12 English letters.
27