Carrier XCT7 Installations- Und Bedienungsanleitung Seite 14

Operation
Parameter inquiry
(1) Long press MENU key for 5 seconds (if it is the 4-way/ Round-way Cassette model, the time is 10 seconds) to
enter parameter inquiry interface. The parameter value is displayed in the upper left corner, and the middle area
displays parameter type (use
(use TIME key to switch it). (2)
Type
A Indoor sensor Tai temperature
b Indoor sensor Tc1temperature
C Indoor sensor Tc2 temperature
d Indoor unit PMV opening/2
E
F Indoor unit central address
Unit number setting
(1) Long press MENU key for 10 seconds (if it is the 4-way/ Round-way Cassette model, the time is 15 seconds) to
enter unit number setting interface. The upper left corner displays the central address, and middle area displays
communication address, and the unit number is displayed in the lower right corner.
(2) If the communication address flashes, you can change it with
After adjustment, you need to press MENU key to confirm changes. If the communication address display is
static, it cannot be changed.
Child lock
(1) Press and MENU keys for 5 seconds to set / cancel child lock. If child lock function is set,
displayed in the main interface. In child lock, no keys are available.
(2) When controlling Fresh Air unit, the controller's main interface will not display
set child lock function, please press
child lock.
Static Pressure (applicable for some models)
(1) When the controller is turned on, press FAN and MENU keys for 5 seconds to enter static pressure interface.
The parameter of static pressure is displayed in the upper left corner. And you can use
After adjustment, you need to press MENU key to confirm changes. The unit number is displayed in the lower
right corner.
(2) The slave controller cannot set the static pressure function.
(3) You can also access this parameter setting through function cycle.
Self-cleaning
Note: Only applicable for the units with self-cleaning function.
(1) Press MENU key, you will enter function cycle, use
access "CL" function, "CL" will flash in the temperature area. Press MENU key to confirm, and the static display
of "CL" indicates that the function has been turned on.
To turn off the "CL" function press MENU key.
(2) To quit after setting "CL" function,, switch modes or switch ON/OFF.
(3) If you set timer or sleeping function, "CL" function does not participate in the function cycle.
If "CL" function is turned on, timer and sleeping modes cannot be set.
or key to switch it), and the unit number is displayed in the lower right corner
meaning
Indoor unit address
key first, and then press MENU key together for 5 seconds to set /cancel
Parameter format
Decimal
Decimal
Decimal
Decimal
Hexadecimal
Hexadecimal
or key, and the adjustment range is 0~30F.
or key to navigate between different functions. When you
10
icon will be
and keys in normal state. To
or key to adjust it.