Repeatedly Playing Individual Tracks, Cds Or Directories; Confi Guring The Display; Bluetooth - Blaupunkt Toronto 400 BT Bedienungs- Und Einbauanleitung

Repeatedly playing individual tracks,
CDs or directories
Press the 4 RPT button < to change be-
u
tween the playback modes:
Opera- Display
tion
RPT TRACK Repeating tracks
CD
MP3/ RPT TRACK Repeating tracks
WMA/
RPT DIR
1
C'n'C
RPT TRACK Repeating tracks
CDC
RPT DISC
Gen. RPT OFF
1
In C'n'C mode, additional playback modes
may be available depending on the con-
nected device
2
Not in MP3 Playlist mode
If the RPT function is active, the RPT symbol
appears on the display.
Confi guring the display
Press the DIS/ESC button = once or several
u
times to change between these displays:
Opera- Display
tion
T 01 02:15
CD
T 01 18:33
01 ABC
ABCDEF
MP3/
WMA/
ABCDEF
C'n'C
PLAY 02:15 Playing time
CLK 18:33
T 01 02:15
CDC T 01 18:33
CD 02T 03
02_Toronto400BT_gb.indd 39
Meaning
Repeating folders
2
Repeating a CD
Regular playback
Meaning
Track number
and playing time
Track number
and time
File name
1
Artist
1
Album name
Time
Track number
and playing time
Track number
and time
CD number and
track number
CD/MP3/WMA/C'n'C/CD changer mode | Bluetooth®
1
Artist and album name must be stored as
ID3 tag and are displayed only for approx.
10 seconds and perhaps as scrolling text;
otherwise, the fi le name is displayed.
Note
You can switch the display of CD text of an
audio CD on and off (see the ch. "User set-
tings", section "Performing settings in the
user menu", "CD TEXT" menu item). If CD text
is switched on, the corresponding CD text is
displayed once as scrolling text at the start of
a track.
Bluetooth®
You can connect the car sound system via Blue-
tooth® with other Bluetooth®-ready devices, such
as cell phones or MP3 players. This allows you
to use the car sound system with its integrated
microphone as hands-free system for connect-
ed cell phones and control the audio output of
other Bluetooth® devices and play them back via
the loudspeakers of the car sound system (Blue-
tooth® streaming).
Bluetooth® technology is a wireless connection of
short range. For this reason, Bluetooth® devices
must be located near the car sound system (in the
vehicle) to establish and maintain a connection.
To establish a Bluetooth® connection, you must
fi rst register the car sound system and the Blue-
tooth® device. When you register the devices, a
Bluetooth® connection is subsequently estab-
lished automatically. This connection remains in
effect as long as the Bluetooth® device is within
range. If the connection is interrupted, e.g. be-
cause you moved the cell phone outside the range,
the connection is automatically re-established as
soon as you are back within range.
You can connect only one cell phone and stream-
ing device with the car sound system at a time.
If you connect a new device with the car sound
system, the connection to a currently connected
device may automatically be interrupted. How-
ever, the car sound system leaves up to 5 differ-
ent Bluetooth® devices registered, and you can
quickly and easily connect any of these devices
39
03.03.2009 13:22:28 Uhr