Blaupunkt Toronto 400 BT Bedienungs- Und Einbauanleitung Seite 48

User settings
SCAN TIME
Setting the scan time in 5-second increments.
Settings: 5 – 30.
button > to open the sub-
Press the
u
menu.
Press the button
u
the setting.
CLOCK SET
Setting the time.
button > to open the sub-
Press the
u
menu.
Press the button
u
between minutes and hours.
The minute or hour display fl ashes if it is
selected.
Press the button
u
minutes or hours.
Briefl y press the MENU•OK button ? to
u
confi rm the time entered.
Note:
In 12-hour mode (12H MODE), an "A" is dis-
played after the time for the time before noon
or a "P" for the time after noon.
12H/24H MODE
Selecting the 12 or 24-hour time. Settings: 12H,
24H.
button > to open the sub-
Press the
u
menu.
button > to change between
Press the
u
the settings.
CLOCK
Switching the display of time on or off with radio
and vehicle ignition switched off. Settings: ON,
OFF.
button > to open the sub-
Press the
u
menu.
button > to change between
Press the
u
the settings.
48
02_Toronto400BT_gb.indd 48
@ / 2 to perform
5 / > to change
@ / 2 to adjust the
Briefl y press the MENU•OK button ? to
u
confi rm the selected setting.
BEEP
Switching the confi rmation beep on or off. Set-
tings: ON, OFF.
button > to open the sub-
Press the
u
menu.
button > to change between
Press the
u
the settings.
Briefl y press the MENU•OK button ? to
u
confi rm the selected setting.
MUTE LVL
Setting the volume for low volume. Settings: 0 -
50.
button > to open the sub-
Press the
u
menu.
@ /
Press the button
u
volume control 4 to perform the setting.
ON VOLUME
Setting the power-on volume Settings: 0 – 50 or
LAST VOL (volume set last before switching off
the car sound system). With the "LAST VOL" set-
ting, the power-on volume is limited to max. 25.
button > to select the setting
Press the
u
"LAST VOL".
- or -
button 5 to set the power-on
Press the
u
volume between 0 and 50.
@ /
Press the button
u
volume control 4 to perform the setting.
REG
(only for tuner region "EUROPE")
Only possible in FM radio mode: Switching REG
function on or off. Settings: ON, OFF.
button > to open the sub-
Press the
u
menu.
button > to change between
Press the
u
the settings.
2 or turn the
2 or turn the
03.03.2009 13:22:33 Uhr