Inserting/Ejecting A Cd; Connecting/Removing A Usb Data Carrier; Selecting Tracks; Interrupting Playback - Blaupunkt 200-Serie Bedienungs- Und Montageanleitung

CD/MP3/WMA mode| Inserting/ejecting a CD | Connecting / Removing a USB data carrier
Notes:
• The respective audio source can be select-
ed only if a corresponding CD is inserted or
a corresponding device is connected.
• If the car sound system rst has to read the
data of a connected device or data carrier
before the playback, the display shows
"READING". The duration of the reading
depends on the data volume and design
of the device or data carrier. If the device
or data carrier is defective or the trans-
ferred data cannot be played back, a corre-
sponding message appears on the display
(e.g. "CD ERROR").

Inserting/ejecting a CD

Inserting a CD
Risk of severe damage to the CD
drive!
Noncircular contoured CDs (shape CDs)
and CDs with a diameter of 8 cm (mini CDs) must
not be used.
We accept no responsibility for any damage to the
CD drive that may occur as a result of the use of
unsuitable CDs.
Note:
You must not hinder or assist the drive as it
automatically draws in the CD.
If the inserted CD cannot be played back, "CD
ERROR" is brie y displayed and the CD is au-
tomatically ejected after approx. 2 seconds.
Ejecting a CD
Press the button to eject an inserted CD.
Notes:
• If a CD is ejected and not removed, the
drive will automatically draw it back in
again after approx. 10 seconds.
• You can also eject CDs while the car sound
system is switched o or while another au-
dio source is activated.

Connecting/removing a USB data carrier

You can connect USB data carriers to the USB
port at the front of the device.
Connecting a USB data carrier
Swich o the car sound system so that the
data carrier will be correctly registered.
Connect the USB data carrier.
Turn on the car sound system.
If the USB data carrier is initially selected as
audio source, the data are read rst.
Selecting tracks/folder
You can nd new track or folder selectiing.
Long press the
onds to select previous/next folder.
Short press the
vious/next track.

Interrupting playback

Press the button to interrupt the playback
("PAUSE") or to continue it.

Playing tracks in random order

Press the 4 button to change among the
MIX
playback modes.
If the MIX function is switched on, the icon
(mix all tracks) or
MIX
rent folder) is shown on the display.
Repeatedly playing individual tracks
or directories
3
Press the button to change among the
RPT
playback modes:
If the REPEAT function is switched on, the icon
(repeat tracks) or
（Repeat folder) is shown on the display.
Con guring the display
Press the DIS button once or several times to
toggle between these displays:
• Current playback total time.
• Track name, artist and album name must be
stored as ID3 tag to be able to display them.
• The le and folder name is displayed only in
MP3/WMA mode.
button for approx. 2 sec-
button to select pre-
(mix tracks of cur-
MIX
10
10