NOTICE
Risk of damage!
If the refrigerating appliance has been
transported horizontally, lubricant from
the compressor may make its way into
the cooling circuit.
Allow the appliance to stand upright
■
for approx. 2 hours after transport
and before connecting. This allows
the lubricant enough time to fl ow
back into the compressor.
• Insert the mains plug into an easily ac-
cessible and properly installed socket
(220–240 V~/50 Hz).
The compressor starts to work, the refrig-
erant flows through the pipes and a quiet
humming sound can be heard.
You will find all important information
about operation from page EN-13.
Page EN-25
Start-up