Product Safety Information; Product Specifications - Ingersoll-Rand G3 Serie Technische Produktdaten

Product Safety Information

Intended Use:
These Air Grinders are designed for material removal or cutting off using a rotated abrasive
wheel, in accordance with the product specification table.
● Failure to observe the following warnings, and to avoid these potentially hazardous
situations, could result in death or serious injury.
● Always turn off the air supply, bleed the air pressure and disconnect the air supply hose
when not in use, before installing, removing or adjusting any accessory on this tool, or
before performing any maintenance on this tool or any accessory.
● Do not attempt to disassemble the internal Speed Controller. It is available only as a unit.
For additional information refer to Product Safety Information Manual Form 04584959.
Manuals can be downloaded from ingersollrandproducts.com

Product Specifications

Free
Speed
Model(s)
rpm
G3X180RH63 18000
G3X180PH63 18000
G3X150RH64 15000
G3X150PH64 15000
G3A120RP1045 12000
G3A120PP945 12000 M14 x 2.0-6g
G3A120PP945A 12000 M14 x 2.0-6g
G3A120PP945AV 12000 M14 x 2.0-6g
G3A120RP105 12000
G3A120PP95 12000 M14 x 2.0-6g
G3A120PP95A 12000 M14 x 2.0-6g
G3A120PP95AV 12000 M14 x 2.0-6g
G3A100RP106 10000
G3A100PP96 10000 M14 x 2.0-6g
G3A100PP96A 10000 M14 x 2.0-6g
G3A100PP96AV 10000 M14 x 2.0-6g
G3L086PP95 8600 M14 x 2.0-6g Wire Brush, 27
G3L120RP1045 12000
80153208_ed10
WARNING
Arbor Size Wheel Type
3/8"-24 1
3/8"-24 1
3/8"-24 1
3/8"-24 1
5/8"-11 27
27
27
27
5/8"-11 27
27
27
27
5/8"-11 27
27
27
27
5/8"-11 27
Maximum
Wheel
Wheel
Diameter
Thickness
in. (mm) in. (mm)
3 (76) 1/2 (13)
3 (76) 1/2 (13)
4 (100) 1/4 (6)
4 (100) 1/4 (6)
4.5 (115) 1/4 (6)
4.5 (115) 1/4 (6)
4.5 (115) 1/4 (6)
4.5 (115) 1/4 (6)
5 (125) 1/4 (6)
5 (125) 1/4 (6)
5 (125) 1/4 (6)
5 (125) 1/4 (6)
6 (152) 1/4 (6)
6 (152) 1/4 (6)
6 (152) 1/4 (6)
6 (152) 1/4 (6)
6 (152) 1/4 (6)
6 (152) 1/4 (6)
EN
Guard Part
Number
LE2-931
LE2-931
LE2-941
LE2-941
AG3-106-45
AG3-106-45
AG3-106-45
AG3-106-45
AG3-106-5
AG3-106-5
AG3-106-5
AG3-106-5
AG3-106-5
AG3-106-5
AG3-106-5
AG3-106-5
LA3-106-5-EU
AG3-106-45
EN-1