Product Safety Information; Product Specifications - Ingersoll-Rand TA Technische Produktdaten

Product Safety Information

Intended Use:
These Air Grinders are designed for material removal or cutting off using a rotated abrasive wheel, in
accordance with the product specification table.
• Do not mark any nonmetalic surface of this tool with customer identification codes. Such action
could affect tool performance.
For additional information refer to Air Grinder Product Safety Information Manual Form 04584959.
Manuals can be downloaded from www.irtools.com.

Product Specifications

Free
Speed
Model
rpm
TX180RH63MC-EU 18,000
TX180RH63ML-EU 18,000
TXD180RH63MC-EU 18,000
TXD180RH63ML-EU 18,000
TA180RP63MC-EU 20,000
TA180RP63ML-EU 20,000
TA120RP64MC-EU 12,000
TA120RP64ML-EU 12,000
TXA135RP64MC-EU 13,500
TXA135RP64ML-EU 13,500
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain condensate from
valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a properly sized Safety Air Fuse
upstream of hose and use an anti-whip device across any hose coupling without internal shut-off, to prevent
hose whipping if a hose fails or coupling disconnects. See drawing 16573800 and table on page 2.
Maintenance frequency is shown in circular arrow and defined as h=hours, d=days, and m=months. Items
identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
Form 16576217-Edition 1
WARNING
Wheel
Diameter
Arbor Wheel
Size Type
inch
(mm)
3/8"-24 1 3 (76)
3/8"-24 1 3 (76)
3/8"-24 1 3 (76)
3/8"-24 1 3 (76)
3/8"-24 27 3 (76)
3/8"-24 27 3 (76)
3/8"-24 27 4 (100)
3/8"-24 27 4 (100)
3/8"-24 27 4 (100)
3/8"-24 27 4 (100)
Maximum
Wheel
Guard Part
Thickness
Number
inch
(mm)
1/2 (12.7) LE2-931
1/2 (12.7) LE2-931
1/2 (12.7) LE2-931
1/2 (12.7) LE2-931
1/4 (6.4) AG20-106-3
1/4 (6.4) AG20-106-3
1/4 (6.4) AG20-106-4
1/4 (6.4) AG20-106-4
1/4 (6.4) AG20-106-4
1/4 (6.4) AG20-106-4
6. Thread size
7. Coupling
8. Safety Air Fuse
9 Oil
10. Grease
Sound Level dB (A)
(ANSI S5.1-1971)
Power
Pressure
(ISO3744)
--- ---
--- ---
78.5 ---
78.5 ---
82.0 ---
82.0 ---
82.0 ---
82.0 ---
80.2 ---
80.2 ---
Vibration
Level
(ISO8662)
m/s²
---
---
8.6
8.6
3.2
3.2
0.9
0.9
0.5
0.5
3