Av Preset; Manual Programme Preset - Sony KE-W50A10E WEGA Bedienungsanleitung

AV Preset

Do the following options.
1
Press OK to select "AV Preset".
2
Press M/m to select the desired input source, then press OK.
3
Press M/m to select the desired option below, then press OK.
Option
Label
Skip

Manual Programme Preset

Before selecting "Label"/"AFT"/"Audio Filter"/"Skip"/"Decoder", press PROG +/- to select
the programme number with the channel. You cannot select a programme number that is set
to skip (page 33).
1
Press OK to select "Manual Programme Preset".
2
Press M/m to select one of the following options, then press OK.
Description
Assigns a name to any equipment connected to the side or rear
sockets. The name will be displayed briefly on the screen when the
equipment is selected.
Press M/m to select one of the following, then press OK.
Equipment labels: Uses one of these preset labels.
Edit: Creates your own label. Follow steps 3 to 5 of "Programme
Labels" (page 30).
Skips an input source that is not connected to any equipment when
you press M/m to select the input source.
After selecting this option, press OK.
Continued
31
GB