Service; Appliance-Specific Safety Instructions - Parkside PAAS 12 A2 Originalbetriebsanleitung

d) Under abusive conditions, liquid may be ejec­
ted from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause
irritation or burns .
e) Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury .
f) Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire
or temperature above 130 °C (265°F) may
cause explosion .
g) Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instruc­
tions. Charging improperly or at temperatures
outside the specified range may damage the
battery and increase the risk of fire .
■ 34 │ GB │ MT
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries!
ble battery from heat, for example from con-
tinuous exposure to sunlight, fire, water and
moisture. There is a risk of explosion .

6 . Service

a) Have your power tool serviced by a qualified
repair person using only identical replace­
ment parts. This will ensure that the safety of
the power tool is maintained .
b) Never service damaged battery packs. Service
of battery packs should only be performed by
the manufacturer or authorized service providers .

Appliance-specific safety instructions

■ Hold power tool by insulated gripping
surfaces, when performing an operation
where the fastener may contact hidden wiring
or its own cord. Fasteners contacting a "live"
wire may make exposed metal parts of the
power tool "live" and could give the operator
an electric shock .
■ Wear a dust mask!
WARNING!
■ Do not use any accessories which are not
recommended by PARKSIDE . This can lead to
an electric shock and fire .
Protect the rechargea-
PAAS 12 A2